- Toto téma obsahuje 13 odpovedí, 6 hlasov, a bola naposledny upravená pred 14 rokmi, 2 mesiacmi od
.
-
Príspevky
-
Caute, mam problem. Omylom som si zmazal moj uzivatelsky folder (~) a od vtedy ma moj pocitac nejaky problem so zaspavanim. Zavirem ho a nezaspi, diodka svieti dalej. Ked pocitac restartnem a hned ho po prihlaseni zavriem, tak zaspi. Neviete kde by mohol byt problem?
vymazanie domovskeho priecinka nema ziadny vplyv na chod systemu. Problem bude niekde inde.
Ako pri kazdom probleme s apple pocitacom treba ako prve spravit:
1) disk utility -> repair permissions
2) disk utility -> repair disk
3) reset NVRAM/PRAM [ http://support.apple.com/kb/ht1379 ]Ahoj. Pozri logy v konzole.
Pusti aplikaciu „console“, preklikni sa na all messages a skus ho dat do sleep-u.
V logoch bude urcite vidiet vypis na com sleep zlyhal. Popripade to sem postni.@sleepwalk3r: skusal som vsetko, nic nepomohlo … a myslel som si ze tam je nejaky konfig niekde, ked tam mam ssh kluce a gitconfig
Problem som ale vyriesil, neviem ci to bolo tym, ale zevraj to robi ovladac na tlaciaren … ked som si to zrusil, uz to ide … no netusim ci to bolo tym lebo ten ovladac mam uz rok asi … :D
Zdravím, už asi mesiac pozorujem jav, že MBP 13″ mi po zaklapnutí nezaspí, len sa vypne displej a diodka svieti, ale „nedýcha“…robil som opravu práv, aj reset PRAM, nič nepomohlo..neviete niekto čo s tým?
Nemas nieco pripojene cez usb? Hlavne huby (teda akoze haby :D) a tlaciarne to zvyknu robit. Potom nejake aplikacie skus, ale to si asi spravil. Novy user by to nemal robit, v tom pripade to nebude hw, co je lepsie.
Ale nemusi to byt tym sposobene. Skus este vypojit magsafe a zaklapnut az potom – ci zaspi. To by som urcite este vyskusal, lebo si pamatam, ze lion niekedy na zaciatku takto blbol…
Mozno skus este vymaza /Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist ,ale hlavne zaujimavu vec som sa dozvedel:
The mechanism that controls the sleep signal when your portable closes is called a reed switch. It consists of a metal switch assembly (two pieces of thin metal inside a vacuum-sealed glass bubble or other insulator, connected to the logic board via wire), and a magnet somewhere else. When the magnet comes close enough to the glass bubble, the metal strips connect, closing a circuit and telling the computer to go to sleep.
In the MacBook Pro, the magnet is located inside the display, on the right side. (If you’re typing at your keyboard, staring at the screen.) It’s about halfway down on the 15″ model, and if you hold a paperclip to the front-facing area, it’ll stick.
The reed switch itself (the glass bubble with metal strips inside) is in the same position, but inside the main body of the computer itself.
When you close your lid, the two come into close proximity. Bang, sleep.
The best way to determine the position, since it’s different with different display sizes, is to use a paper clip on the side of the display to find the magnet, then determine the switch location from that.+
I can vouch for the magnet trick. My MBP wouldn’t sleep when I closed the lid, so off we went to the Genius Bar. The guy went in the back and got a little magnet, passed it up and down the aluminum surface on the right side of the screen, and then back and forth on the matching surface on the keyboard near the speaker, and it went to sleep. He woke it up, shut the lid, and it went right back to sleep like it should. Still works 2 days later.
Zaujimave :D
Tak to sa tesim, ze to pomohlo, asi to bude daco s tymi magnetmi :D :D :D Jak mormon, kurnik :D
Roky praxe mas i ty, toto je o stasti :D
Najviac ma štve, že raz za čas mi prestane fungovať pripojenie na airport express, proste pripája pripája a nakoniec zlyhá (iba iTunes, airfoil nemá problém..) takže čisto SW chyba zo strany apple, a musím preinštalovať iTunes vždy nanovo..a práve teraz keď sa mac uspal, a znovu zobudil, tak mi to spravilo..možno to bude mojim externým wifi usb, ale pochybujem.
- Musíte byť prihlásený, aby ste mohli odpovedať na túto tému.
